|
 
Protect the fragile limit switch sensor hoops
from breaking and stopping your machine!
Put a cover on it!
Available in Black, Gray, Red and Gold
If you do break the limit switch or board, contact xTool Support for a new one.
You can turn the limit switches OFF in XCS. They will be off in LightBurn also.
WARNING - There is a risk of crashing the head or cross bar into the side rails.
Use caution and 'Frame' everything. You will not want to use the 'Home' function.
If you do see a crash coming, do not try to stop it by hand. Just turn the power off.
NEVER leave your laser unattended for any reason!
|
|
|
Lasers 
